 |
SmartNet-X routes up to 16 UXGA and Stereo Audio Sources to 64 Remote Monitors and Speakers located at up to 1,000ft (300m) and connected with inexpensive CAT5
|
Overview
The SmartNet-X is a high-quality switching matrix for video and stereo audio type signals. All signal formats are catered for including VGA, SVGA, XGA and UXGA. Standard VGA connectors (HD15 sockets) are used on the rear for ease of installation for video connectivity and RCAs for computer audio.
The units contain a very high bandwidth (400MHz) routing matrix for the Red, Green and Blue video channels and separate switching layers for stereo audio. The color signals and are then balanced internally and combined with the audio signals. This combined signal is then driven out through standard RJ45s on the front panel.
Standard SmartNet-X receiver units are used at the end on each Cat 5 cable to recover the signals. High quality receiver circuits incorporating cable loss compensation provide excellent results up to resolutions of 1600 x 1200 @85Hz.
Compatible with all types of UTP and STP cable, the receivers can have optional internal skew compensation fitted, which solves the problem of delay errors found in the higher specification structured cabling.
The Main Transmitter Signal distribution
All signals are distributed, balanced and driven differentially. This method provides for the best immunity to external noise and interference. Sending signals balanced also minimizes emissions, as any interference transmissions from the cable are cancelled out. 3 Pairs of the Cat 5 cable are used for the three colors and the stereo audio. Pair 4 is used for inline power and the returned Infrared signals from the user.
Control
Each unit can be controlled via a RS422 port connecting via a RJ45 on the front of the main chassis. Two connectors are provided for expansion, allowing a simple Cat5 patch cable to link to additional units. An adjustable rotary switch allows each unit to be assigned a unique ID read when the unit is first powered up. An optional Windows application (SmartNetControl ) is available including a RS232 to RS422 converter.
In addition to the centralized control from a computer, each output can be selected individually at the remote receiver location. Each SmartNet-X receiver unit also has an optional IR eye. Using an IR handset or other third party system, each output can be selected by simply pressing the appropriate number corresponding to the input source number. Once selected the source device can now be controlled from the remote location providing full IR interactivity.
Local audio output
To help accommodate multi-room audio systems, there is an option for local audio output on the front of the unit. The audio is presented as dual RCAs for the stereo pair. Output drivers allow the audio to be connected to any amplifier input at line level. The audio will follow whichever source device is selected.
The Receiver
Dual screen receiver with control
The dual screen receiver has the capability to allow the user to select input from each source device from his remote position using RS232 control or Infrared. It is also capable of driving the same video and audio signals to two independent devices.
Single screen receiver
The compact single screen receiver is used when no control is required. Being single screen, the unit is designed to drive a single display.
Cable compensation - Expected
Owing to expected losses in the UTP cable, provisions are made for compensating the attenuation of the Video signal. For each colour there is an equalization adjustment potentiometer. This arrangement enables compensation for more than 300m of Cat 5 cable.
There is an LED indicator on the side of the receiver unit denoting local power status. The LED illuminates when the receiver unit is connected to the appropriate transmitter showing inline power. An optional DC power connection is also available, this feature is used in a point to point application to enable powering of the transmitter from the receiver unit.
|
|
|
| |
|
|
| |
|
SmartNet-X routes up to 16 UXGA and Stereo Audio Sources to 64 Remote Monitors and Speakers located at up to 1,000ft (300m) and connected with inexpensive CAT5
|
|
Very High Quality Audio Switching
Very High Quality Video Switching
High resolution up to 1600 x 1200
Infra Red and RS422 control
PC Windows software control
Integral UTP distribution
Cable compensation up to 300m
Compact metal housing for receivers
Can be mixed with other video signal (RGB, YUV, RGBS)
|
| |
| Model# |
Description |
Price |
Purchase |
|
SmartNetX |
UXGA/AUDIO/IR over CAT5 16x16 matrix with RS422 control including SNX16X16, SRS422 RS232 adapter, SCONTROL software |
Get Info |
 |
|
SNX08X08 |
UXGA/AUDIO/IR over CAT5 8x8 matrix with RS422 control including SNX08X08, SRS422 RS232 adapter, Smart CONTROL software (SM-CSW) |
Get Info |
|
|
SNX16X04 |
UXGA/AUDIO/IR over CAT5 16x4 matrix with RS422 control including SNX16X04, SRS422 RS232 adapter, SCONTROL software |
Get Info |
|
|
|
|
| 
| 
