 |
K438-0W DVI/VGA extender over fiber Singlemode up 10000m
|
DX3000 - The Future of KVM Extension
With Flat panel displays becoming more prevalent it is natural to drive them digitally through their DVI interface to obtain optimum image quality. DX3000 supports DVI extension up to resolutions of 1600 x 1200 to ensure the benefits of using DVI are maintained even if you locate your monitor 10 km away!
The DX3000 consists of a Transmitter unit and a Receiver unit. These two devices enable long-distance, loss less transmission of DVI video signals between a digital video source and a digital display device. The DX3000 is equipped with DVI-digital (Digital Visual Interface) connectors for a single-link and optional USB 1.1. The DX3000 receiver is small enough to be attached near a projector. With the DX3000, the maximum distance between the source and digital display is 330 feet (100 m) using cat5 and up to 10,000ft using fiber optic.
VGA, DVI and more
DX3000 supports traditional analog VGA as well as digital DVI. All combinations of DVI and VGA (graphics cards and monitors) are supported allowing equipment to be mixed. You could use DX3000 today to extend (with perfect image quality) your existing SVGA equipment. Later, if you purchase a DVI monitor you can use it with DVX3000 even though your computer is equipped with a VGA graphic card. When you finally upgrade to a DVI graphic card, DX3000 will continue to extend your system without any reconfiguration.
Flexibility
DX3000 has a modular architecture providing superb flexibility. Not only are all standard peripheral connections supported keyboard and mouse, but also the different cabling interfaces (depending on model) for bridging the required distance: Cat5 network cable, Multi-mode or Singlemode fibre cables. Other interfaces may also be added such as Serial Port for Touch-Screen, Stereo Audio, Base-Band Video Transmission, USB, 10BaseT Network Management, Parallel Port or other custom interfaces.
The Features
Depending on the type of device, you can connect monitors with a resolution of up to 1600x1200 pixels. You can use a Mac, SUN Keyboard/Mouse or USB Devices. The highly dense packing of the electronic components gives you the ability to mount this unit in a slim, tight housing, which can be placed on the table, as well as mounted at a wall as well as stacked in a 19" Housing.
Bridging the distance with a Cat5 cable (used with a 10BaseT network), you can bridge at least 100m (app. 330ft). Using only 2 fibers of a fiber optical cable (i.e. FOIRL from fiber networking or Fiber To The Desk, ...) you can bridge 200m (app. 650ft) with a 62.5 micron fiber and up to 400m (app. 1310ft) with a 50 micron fiber. If you use single mode fibers/devices, you can extend the distance up to 10km (app 6 1/4 miles) Using fiber devices, you do not only have the advantage of extended cable length, but your line is also absolutely unaffected by electromagnetic interferences (EMI). You have electromagnetic protection against lightings and over voltage. And very good protection for your data.
On Screen Display
You can easily adjust all necessary device parameters through a OSD. Personal selections of color temperature, brightness, contrast, etc.
Connecting Cables
Cat5 Modules: S/UTP (Cat5) cable acc. to EIA/TIA 56A or TSB 36 or Digital STP 17-03170.Four pairs AWG 24. compatible with EIA/TIA 568A
Multimode Modules:
Two fibers 50¨em or 62.5¨em. E.g. I-V(ZN)H 2G50 or I-V(ZN)HH 2G62,5 or I/AD(ZN)H 4G50. |
|
|
| |
|
|
| |
|
The DX3000 extends the distance between any computer supporting DVI-I and monitors or projectors up to 10,000ft. with fiber optics.
|
|
Perfect Image Quality at all Resolutions
Supports both VGA and the latest DVI video interfaces (future proof your investment)
Supports Mixed DVI and VGA operation
Video Resolutions up to 1600 x 1200 @ 60Hz using Cat5 or Fiber Optic Cable
Local Console Option (Dual Access)
Transparent to USB 1.1
No length restrictions for particular video resolutions
Fiber Optic Extension uses only TWO Fibers
Transmission length:
- 100 m with regular Cat5 cable
- (200 m with repeater)
- 200 m with 62,5/125¨ Multi-mode Fiber Cable
- 400 m with 50/125¨ Multi-mode Fiber Cable
- 10 km with 9/125¨ Single-mode Fiber Cable
Compatible with all operating systems
Compatible with all major KVM Switches
Rack Mount options (19"): Mount up to 3 devices in 19"/1U or up to 6 devices in 19"/1U or up to 6 devices in 19"/2U. This saves expensive rack space.
|
| |
| Model# |
Description |
Price |
Purchase |
|
DX3000 |
K438-0W DVI/VGA extender over fiber Singlemode up 10000m |
Get Info |
 |
|
|
|
| 
| 
